Silicone dots printed on fabric: process routes and bond
Screen printing, dispensing or transfer film; bond, cure and roll consistency.
Read moreNews & technical notes
Notes from projects: one industry and one part at a time. What fails in the field, which material belongs where, and how to write a test that settles the argument. The cooperation notes cover the two ways to work with us: direct purchase of production, or an advisory supply-chain service.
Process notes
Bonding, tooling and cure: where a process window ends, and why parts fail there.
Silicone Tap Lights: Body, Sensing, Light and AI Voice
Five systems in one soft lamp: tap recognition, light-body moulding, flicker-free drive, standby current and acoustic design.
Read morePlatinum Poisoning: When Samples Pass and Batches Stay Tacky
Sulphur, tin, amines and flux residue occupy the platinum catalyst: the poison list, six management rules, and how to rule out mould temperature.
Read morePlasma Activation: A 30-Minute Bonding Window
Surface energy decays inside half an hour: four shop-floor scenes that eat the window, four ways to hold it, and how to tell expiry from contamination.
Read moreSilicone Overmolding Failure: 8 Modes and a Bonding Matrix
Why delamination is rarely a machine setting: surface energy, three bonding routes, a substrate matrix and eight failure modes with fixes.
Read moreApplications
One industry, one part: the duty it lives in, why silicone is used, and where it fails first.
Silicone grip dots for textiles: where the grip comes from
Diameter, height, pitch and hardness; four application profiles.
Read moreMedical Silicone Patches: Skin Contact and Wear Limits
Four layers, not one sheet: gel, carrier, functional layer and liner — wear time decides the material, thin-wall limits decide the tooling.
Read moreDrone Gimbal Dampers: Four Silicone Balls and Image Stability
Isolation is a frequency problem: four-point consistency, temperature, ageing and the five parameters to fix before ordering.
Read moreFoam or Perforated Silicone? Helmet Liners and Insoles
Airflow, impact, heat, weight and washability compared, where foam still wins, and the three design changes a switch requires.
Read moreIndustry notes
Changes outside the workshop, translated into material, process and validation decisions.
Optical-Grade LSR: AR Glasses and Headlamp Lenses
Where optical silicone is genuinely optical, three ramping product families, and when glass or resin stays the answer.
Read moreDown to 0.2 mm: Thin-Wall Silicone and Micro Structures
Thin walls are harder to mould: fill resistance, venting and tearing decide yield, and tool precision matters more than compound grade.
Read moreSelf-Lubricating LSR vs Sprayed Silicone Oil
Replacing an operator-dependent spray with controlled release: the window, four applications, four cases to avoid, six validation items.
Read moreCooperation models
Direct purchase of production and the advisory supply-chain service: scope, fee basis and the boundary of responsibility.
How Advisory Fees Work: Start-Up Fee and 10% per Batch
What the start-up fee covers, what the 10% is calculated on, the order of offset and invoicing, and how samples and non-volume projects are treated.
Read moreCooperation Models: Two Parallel Routes, Customer's Choice
Two independent models: direct purchase carried by us as manufacturer, or an optional advisory service with fee rules and responsibility boundaries.
Read moreNew products
Parts showing up in the market, read as engineering: duty, material choice and failure mode.
Ageing-in-Place Detective: Six Overlooked Silicone Parts
Grab bars, bath mats, walker tips and jar openers: what each solves, why silicone fits, and the checks before copying.
Read moreNew product page: cookware pan handle
New product page: CHUCK TAG slide-on NFC pet tag
New product page: silicone overmolded temperature monitor
Need a part assessed?
Send a drawing or a sample with the duty conditions and the cleaning agents it will meet. We reply with a feasibility view, the risk points and the next step — usually within two to three working days.